Press on Almond Korta

Press on Almond korta tippar 240 st

Snabba nagelbehandlingar.

Detta nya smarta press on systemet gör dina nagelbehandlingar så mycket snabbare och lättare. Färdiga, hållbara naglar snabbt och enkelt. Passar både för eget bruk som till den professionella nagelterapeuten.

Press on tippar är tillverkade av en robust och oförstörbar ABS -plast och de 10 vanligaste storlekarna finns i boxen. Till skillnad från en vanlig tipp täcker Press on tips hela nagelplattan. Denna tipptrend kännetecknas av att Press on tips kan bearbetas med olika typer av applikationer. Det här är enkelt - och du blir supersnabb. Detta eliminerar inte bara behovet av att fila övergången från tipp till naturlig nagel, utan eliminerar också behovet av fullständig uppbyggnad som med klassisk nagelmodellering. Du kan applicera din nailart, gellack, nagellack eller vad du önskar direkt på tippen. Det är ett superalternativ till konventionell nagelteknik. Press-on-tipparna finns i olika former och längder. Beställ idag och testa ett enkelt alternativ.

• 240 tippar per box i olika storlekar. 
• Extremt lättarbetade, passar för alla.
• Upplösningsbara, du slipper fila bort materialet och riskera att skada den naturliga nageln.
• Applicera med olika material: Press on glue, Akryl, Akryl gel, gel.
• Tidsbesparande då du slipper uppbyggnad av nagel och kan lägga färg eller nailart direkt på tippen.

Application with TipGlue:

1. Remove old polish if necessary. Prepare the nails and degrease with Cleanser.
    Our tip: It is best to also "buffer" the surface slightly with a buffer. This creates a rough surface, which makes the TipGlue stick even better.

2. Now choose the right tip for your nail size and apply the tip glue to the underside of the artificial nail.

3. Now place the tip diagonally at the nail fold, slowly press it down to the free nail tip and hold it pressed on the nail for a few seconds.

4. then apply the nail tip with a buffer and apply the desired colour as Color-Gel, PolishGel or Nail Polish and then seal.

Application Press On Glue or Acrylic Gel:

1. prepare the natural nails as for a conventional nail modelling.

2. choose the right tip for your nail size. Choose a larger tip rather than a tip that is too small. Roughen the inside of the tip with a buffer or bit in the area of the contact surface.

3. Apply the Press On Glue to the natural nail and cure for 60 seconds in the LED light curing unit or for 120 seconds in the UV light curing unit. Important: Do not remove the sweat layer.

4. Apply Press On Glue or Acrylic Gel to the inside of the tip. Now place the tip diagonally at a distance of approx. 1mm from the upper nail fold and slowly press it down to the free nail tip.
    Important: Make sure that no air bubbles form when applying and pressing.

5. Use our Press On Tip Clip to hold the tip in place and prevent it from slipping.

6. Cure the nail with the Press On Tip Clip for 60 seconds in the LED light curing unit or for 120 seconds in the UV light curing unit. Remove the Press On Tip Clip after curing. 7.

7. If material has run out at the edges, remove it thoroughly with a Pro Pusher or rosewood stick.

8. now coat the entire nail tip with a buffer and apply the desired colour as Color-Gel, PolishGel or Nail Polish and then seal.

Application with acrylic:

1. prepare the natural nail as you would for a conventional nail modelling.

2. choose the right tip for your nail size. Choose a larger tip rather than a tip that is too small. Roughen the inside of the tip with a buffer or bit in the area of the contact surface.

3. Now apply a small acrylic ball to the inside of the Press On Tip. Dip an acrylic brush completely into the acrylic liquid.
    Important: Apply the material only to the nail bed.

Our tip: It is best to fan out the brush at the same time to remove any remaining bubbles in the brush. Then wipe the brush on the Dappen Dish glass and brush the tip of the brush over the acrylic powder until a small ball forms. The ball should smooth out and shine within 3 sec. Now place the small acrylic ball on the area of the nail bed. Keep the brush flat to shape the material on the nail.

4. Now place the tip at an angle with a distance of approx. 1mm to the upper nail fold and slowly press it down to the free nail tip. Important: Make sure that no air bubbles appear when applying and pressing the tip.

5. Press the tip lightly for approx. 60 seconds until the acrylic has hardened.

6. Then trim the nail with the professional file and file it into shape.

7. Remove dust from natural nails with a dust brush or nail brush.

8. If material has run out at the edges, remove it thoroughly with a Pro Pusher or rosewood stick.

9. Now matt the entire nail tip with a buffer and apply the desired colour as a Color-Gel, PolishGel or Nail Polish and then seal.

Removing Press On Nails:

1. trim the nail either with a nail file 80/80 grit or with an electric nail cutter. Important: Carefully remove as much of the nail as possible. Do not get on the natural nail, it is best to file off 2/3 of the modellage.

2. Now file off the rest of the nail with a file 100/180 grain until there is no material left on the natural nail.

3. remove the last unevenness with the buffer file. To make it easier to remove the cuticles, apply our cuticle remover and leave it on for 2-3 minutes.

4. Then carefully push back the cuticles with a Pro Pusher, horse foot or rosewood stick. Then remove any cuticle residue from the nails. Of course, you can also remove the cuticles with a nail cutter.

5. Remove the remaining excess skin with cuticle nippers. Then remove the rest of the dust with cleaner and a cellulose.

6. To provide your natural nail with plenty of care and nutrients, apply a thin layer of Base Coat Calcium Gel to the nail and leave to air dry for a short time.